What are the feeding methods for high-speed mixers?

What are the feeding methods for high-speed mixers?

High speed mixer is a kind of mixing mechanical equipment that has a wide range of applications before. This kind of machine with high efficiency mixing characteristics is favored and favored by friends. For example, for mixers suitable for coloring and drying raw materials, in order to reasonably improve production efficiency, the feeding method during production is more important. High speed mixers are a type of vertical mixers, and the feeding port of the machine equipment is generally 1.5 meters higher than the horizontal surface. What aspects should users pay attention to when selecting the feeding method?

High Speed Mixing Machine

1. Screw feeder feeding. After the high speed mixer machine is installed in place, use a screw feeder to add material to its mixing pot. Generally, the height of the storage hopper of the feeding machine can be freely designed and manufactured. In the industry, the height of the storage hopper is generally designed to be 650-700mm, which can effectively reduce the working intensity of workers during feeding. This feeding method feeds raw materials in powder, particle, and other states through a screw. Depending on the model and size of the high-speed mixer, the feeding amount can be controlled through a level meter or a time relay. The screw feeder features fast feeding, convenient operation, and safety.


2. Vacuum feeder feeding. This is a feeding method through negative pressure vacuum. It consists of a vortex air pump, a suction pipe, an suction pipe, a vacuum transition bucket, and an electrical control cabinet. Especially for powder feeding, it can effectively suppress dust overflow, and has the characteristics of fast feeding speed, small footprint, and high degree of automation. The vacuum feeding machine can be placed according to the on-site situation, making it convenient to use.


3. Manual feeding. Manual feeding is significantly time-consuming and laborious, requiring actual operators to climb onto the base of the mixer and open the lid before carrying out the feeding operation.


Screw feeder feeding, vacuum feeder feeding, manual feeding. These methods are the feeding methods used by high-speed mixers, and friends can choose to use them according to their own conditions. The screw feeder and vacuum feeder can be automated. Relatively speaking, the investment cost of the overall high-speed mixer application is slightly higher.


The above are the most common feeding methods at this stage. Friends can choose the suitable feeding method according to the product and requirements.